Product ID:WHITE TINT BASE GEL COAT
MSDS Date:01/02/1992
FSC:8010
NIIN:00N067573
MSDS Number: CBGDC

NESTE POLYESTER

5106 WHEELER AVE
FORT SMITH, AR 72901
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 501-646-7865

Cage: JO113

NESTE POLYESTER

FORT SMITH, AR 72901 US

Telephone: 501-646-7865

Cage: JO113

METHACRYLIC ACID, METHYL ESTER; (METHYL METHACRYLATE) (SARA

CAS: 80-62-6

RTECS: OZ5075000

Fraction By Weight: <5%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

STYRENE (SARA 313)

CAS: 100-42-5

RTECS: WL3675000

Fraction By Weight: 33.04%

OSHA PEL 100 PPM

ACGIH TLV: 50PPM/100STEL, S

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

0.022

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

OF PARTICULATE & GAS & VAPOR. IN CONFINED AREAS

RTECS: 9999999ZZ

RESP PROT MAY ALSO BE NEC IN ANY LATER MFG

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE/CHRONIC: REPORTS HAVE ASSOC RPTD
& PRLNG OCCUP OVEREXP TO SOLV W/PERM BRAIN & NERV SYS DMG.
INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING & INHALING
CONTENTS MAY BE HARMFUL/FATAL. DO NOT BREA THE VAPS/SPRAY MIST.
WEAR APPROP, PROPERLY FITTED RESP (NIOSH/MSHA APPRVD) DURING &
AFTER APPLICATION (EFTS OF OVEREXP)
Explanation of Carcinogenicity:STYRENE: IARC MONOGRAPHS, SUPPLEMENT,
VOL 7, PG 345, 1987: GROUP 2B. ANIMAL: NERVOUS SYSTEM.
Effects of Overexposure:HLTH HAZ: UNLESS AIR MONITORING DEMONSTRATES
VAP/MIST LEVELS ARE BELOW APPLIC LIM. FOLLOW RESP MFR'S DIRECTIONS
FOR RESP USE. VAPS OF THIS PROD MAY CAUSE IRRIT OF EYES, NOSE,
THROAT, UPPER RESP TRACT, MUC MEMB, & SKIN.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE: FLUSH W/LUKE WARM WATER FOR AT LEAST 15 MIN. SEEK MD
IMMED. SKIN: FLUSH W/COPIOUS AMTS OF LUKE WARM WATER. REMOVE CONTAM
CLTHG PROMPTLY. WASH THORO W/SOAP & WATER. INHAL: REMOVE TO FRESH
AIR. RE STORE BRTHG IF REQUIRED. CONT MD IMMED.INGEST: RINSE MOUTH
IMMED. GIVE 6-8 OUNCES OF LIQ (NEVER GIVE ANYTHING BY MOUTH TO
UNCON PERS). DO NOT INDUCE VOMIT UNLESS ADVISED BY MD. CONT MD
IMMED.

Flash Point Method:TCC
Flash Point:83.0F,28.3C
Lower Limits:1.1%
Upper Limits:12.5%
Extinguishing Media:USE FOAM, CARBON DIOXIDE, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:KEEP CONTRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS, & OPEN FLAME. VAPS MAY BE HVR/AIR & MAY
TRAVEL ALONG GROUND BEFORE IGNIT/FLASHING (SUP DAT)

Spill Release Procedures:STAY UPWIND & AWAY FROM SPILL UNLESS WEARING
APPROP PROT EQUIP. STOP &/CONTAIN DISCHARGE IF IT MAY BE DONE
SAFELY. KEEP ALL SOURCES OF IGNIT AWAY. VENT AREA OF SPILL. USE
NON-SPARKING TOOLS FOR CLEANU P. COVER W/INERT MATL TO REDUCE
FUMES. (SUP DAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:USE I/A/W GOOD INDUS WORKPLACE PRACT.
AVOID UNNEC CONT. STORE IN DRY AREA AWAY FROM EXCESS HEAT. FOR
INDUS USE ONLY. PERS SHOULD AVOID INHAL OF VAPS.
Other Precautions:PERS CONT W/PROD SHOULD BE AVOIDED. SHOULD CONT BE
MADE, REMOVE SATURATED CLTHG & FLUSH AFFECTED SKIN AREAS W/WATER.
CONTRS OF THIS MATL MAY BE HAZ WHEN EMPTIED. SINCE EMPTIED CONTRS
RETAIN PROD RESID UES (VAP, LIQ, &/SOLID), ALL (SUP DAT)

Respiratory Protection:IN OUTDOOR/OPEN AREAS USE NIOSH/MSHA APPRVD MECH
FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY DURING
SPRAY APPLICATION. IN RESTRICTED VENT AREAS USE NIOSH/MSHA APPRVD
CHEM-MECH FILTERS DESIGNED TO REMOVE COMBINATION (ING 4)
Ventilation:USE VENTILATION AS REQUIRED TO CONTROL VAPOR
CONCENTRATIONS. AVOID PROLONGED OR REPEATED BREATHING OF VAPORS.
Protective Gloves:NATURAL RUB, NEOPRENE, BUNA N/NITRILE.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:APRON TO AVOID SKIN CONTACT. EMERGENCY
EYEWASH & DELUGE SHOWER MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
EXPLO HAZ: BACK TO VAP SOURCE. KEEP WELDING/CUTTING EQUIP AWAY FROM
PROD. SPILL PROC: KEEP OUT OF DRAINS, SEWERS/WATERWAYS. CONT FIRE
AUTH. NOTIFY LOC HLTH & POLLUTION CTL AGENCIES. CALL SPILL RESPONS
E TEAMS IF LGE SPILL. OTHER PREC: HAZ PREC GIVEN IN THIS MSDS MUST
BE OBSERVED.

HCC:F4
Boiling Pt:B.P. Text:>214F,>101C
Vapor Pres:29
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE LIQUID, WITH AROMATIC ODOR

Stability Indicator/Materials to Avoid:YES
THIS PRODUCT IS INCOMPATIBLE WITH STRONG ACIDS, PEROXIDES, AND OTHER
OXIDIZING AGENTS, ORGANIC METAL SOAPS.
Stability Condition to Avoid:AVOID EXPOSURE TO SPARKS, OPEN FLAME, HOT
SURFACES, AND ALL SOURCES OF HEAT AND IGNITION.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE
TOXIC OXIDES OF CARBON AND/OR NITROGEN.

Waste Disposal Methods:DO NOT FLUSH TO SEWER, WATERSHED, OR WATERWAY.
DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND FEDERAL
REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.